small diameter pull-in CIPP

iPlus Infusion® Installation

How iPlus Infusion® Is Installed

  1. The iPlus Infusion® tubes are wet out using a controlled resin impregnation system that fully saturates the tube with thermosetting resin. 
  2. The resin-saturated tube is pulled into a damaged pipe. 
  3. Air is used to inflate the tube and then steam cures the resin to form a tight-fitting, jointless and corrosion-resistant replacement pipe. 
  4. Service laterals are restored internally with robotically controlled cutting devices.
  5. Rehabilitated pipes are inspected by closed-circuit TV.